Sky-Watcher + QHYCCD
Evostar 120ED with the QHY183C
between the corrector and the sensor, for 55.0 mm of back focus.
21.0 mm of spacers puts the Evostar 120ED with the QHY183C exactly on target.
Assumes the Sky-Watcher 0.85x Reducer/Corrector for Evostar 120ED (0.85× reducer) between the two.
The imaging train
Where this number comes from
The Sky-Watcher 0.85x Reducer/Corrector for Evostar 120ED wants 55.0 mm between its rear shoulder and the sensor.
The QHY183C contributes 17.5 mm of that on its own — sensor to front face. Its M42 thread does not meet the corrector's M48 directly, so the ZWO M42 (T2) to M48 Extender 16.5mm bridges them and adds 16.5 mm. Together that is 34.0 mm, leaving 21.0 mm for spacers.
21.0 mm comes to exactly 21.0 mm, so this combination lands on target with nothing left over.
What to buy
| Part | Length | Threads |
|---|---|---|
ZWO M42-M42 (T2) Extender 21mm BuyAgena Astro · US · also Teleskop-Express (EU) | 21.0 mm | M42 |
ZWO M42 (T2) to M48 Extender 16.5mm BuyAgena Astro · US · also Teleskop-Express (EU) | 16.5 mm | M42 → M48 |
| Corrector to camera | 37.5 mm | 55.0 mm − 17.5 mm camera = 37.5 mm needed |
Links to retailers are affiliate links. They cost you nothing and they pay for this site. They do not affect which parts are recommended — the stack above is whatever lands closest to target.
What you get
- Focal length
- 765 mm at f/6.4 (from 900 mm native)
- Sampling
- 0.65″/px
- Field of view
- 60′ × 40′
- Sensor
- 13.31 × 8.84 mm, 2.4 µm pixels
Where to buy this setup
Where to buy the QHYCCD QHY183C
Affiliate link — they may earn this site a commission and change nothing above. No prices shown: this site is static, and a stale price is worse than none.
Where to buy the Sky-Watcher 0.85x Reducer/Corrector for Evostar 120ED
Affiliate link — they may earn this site a commission and change nothing above. No prices shown: this site is static, and a stale price is worse than none.
Read next
Sources and caveats
QHYCCD publish "17.5mm（±0.2）" for the QHY183C without stating whether that figure includes the adapter supplied in the box. We use it exactly as published, which is correct for the camera in the configuration it is sold in. If you have removed or added an adapter at the camera end, adjust accordingly.
Every figure on this page was read from the manufacturer’s own documentation and last checked in September 2026. Manufacturers revise them — ZWO and QHY both have, mid-model — so that date is part of the answer.
Check these figures against your own manuals before buying. If something here is wrong, tell us and we will fix it.
Measuring your own? The four tools worth owning for this →