Askar + QHYCCD
FRA400 with the QHY533M
between the corrector and the sensor, for 55.0 mm of back focus.
41.0 mm of spacers puts the FRA400 with the QHY533M exactly on target.
Assumes the Askar F3.9 0.7x Full Frame Reducer (0.7× reducer) between the two.
The imaging train
Where this number comes from
The Askar F3.9 0.7x Full Frame Reducer wants 55.0 mm between its rear shoulder and the sensor.
The QHY533M contributes 14.0 mm of that on its own — sensor to front face — which leaves 41.0 mm for spacers.
40.0 mm + 1.0 mm comes to exactly 41.0 mm, so this combination lands on target with nothing left over.
What to buy
| Part | Length | Threads |
|---|---|---|
Baader M48 extension tube 40mm BuyAlpine Astronomical · US | 40.0 mm | M48 |
Astrodymium M48 fine adjustment ring 1.0mm BuyAgena Astro · US | 1.0 mm | M48 |
| Corrector to camera | 41.0 mm | 55.0 mm − 14.0 mm camera = 41.0 mm needed |
Links to retailers are affiliate links. They cost you nothing and they pay for this site. They do not affect which parts are recommended — the stack above is whatever lands closest to target.
What you get
- Focal length
- 280 mm at f/3.9 (from 400 mm native)
- Sampling
- 2.77″/px
- Field of view
- 2.31° × 2.31°
- Sensor
- 11.31 × 11.31 mm, 3.76 µm pixels
Where to buy this setup
Where to buy the Askar FRA400
Affiliate link — they may earn this site a commission and change nothing above. No prices shown: this site is static, and a stale price is worse than none.
Where to buy the QHYCCD QHY533M
Affiliate link — they may earn this site a commission and change nothing above. No prices shown: this site is static, and a stale price is worse than none.
Where to buy the Askar F3.9 0.7x Full Frame Reducer
Affiliate links — they may earn this site a commission and change nothing above. No prices shown: this site is static, and a stale price is worse than none.
Read next
Sources and caveats
QHYCCD publish "14mm（±0.2）" for the QHY533M without stating whether that figure includes the adapter supplied in the box. We use it exactly as published, which is correct for the camera in the configuration it is sold in. If you have removed or added an adapter at the camera end, adjust accordingly.
We have not recorded the thread gender of every part listed above. The lengths are right; check that the faces actually mate before ordering.
Every figure on this page was read from the manufacturer’s own documentation and last checked in September 2026. Manufacturers revise them — ZWO and QHY both have, mid-model — so that date is part of the answer.
Check these figures against your own manuals before buying. If something here is wrong, tell us and we will fix it.
Measuring your own? The four tools worth owning for this →